JJPRO T1 Beetle 95mm Micro FPV Racing Quadcopter – BNF

JJPRO T1 Beetle 95mm Micro FPV Racing Quadcopter – BNF.Flight controller: Naze32+DSM2 Brush Flight Controller. Motor: MD8520 Brush Motor(4.8g/pcs). Camera: 800TVL HD CMOS 1/4 inch Camera AV Wireless Transmitter: 5.8g 25mw 40ch. Batterry: 3.7V 600mah 20C Lipo battery. Flight time: 5-6 minutes.

FPV Camera: Sensor: 1/3 “CMOS. Lens: M8 800TVL Lens Angle: 150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal perspective Format: NTSC / PAL (switchable) Power: 3.6-5.5V

Transmitter: Support video format: NTSC / PAL

Output Impedance: 75 Ohm
Output signal strength: 12 ~ 14dBm
Output Power: 25mW
Wireless Channel: 40CH
Operating voltage: 3.6V ~ 5.5V
Current: 100mA
Audio carrier: 6.5MHz
Weight: 6.8g

NAZE32 flight control is a open-source flight controller, support Cleanflight and Baseflight

Using 32bit ARM microprocessor, working in 3.3V/72MHZ

Attached gyro, support manual mode, horizontal mode

The firmware can be upgraded and adjusted by Micro-USB, the parameter adjustment interface is Baseflight-Configuration and Cleanflight-Configuration

Weight: 42.5g (Exclude battery)

Size: 82 X 82 X 21mm

Wheelbase: 95mm

Propeller Size: 55mm

Package Contents:1 * Paddle propeller 1 * Naze32 with DSM2 Flight Controller 1 * Alien Carbon Fibre Frame kit 4 * 8520 Coreless Motor 1 * English Manual 1 * Charging cable (use with balanced charge) 1 * 3.7V 600mah 20C Battery 1 * 5.8G VTX w/Camera antenna 8 * 55mm Propeller